Hitec RDX1 Mini 65W 4 Cell (4S) LiPo AC Charger

Introduction

RDX1 Mini 65W4 Cell (4S) LiPo AC Charger from Hitec – HRC44295

Hitecs sleekly-designed, micro-processor controlled, compact RDX1 Mini AC charger packs 65 watts of power into a fraction of the size of most chargers to meet your battery management requirements. It is compatible with a full range of the most popular battery types, including LiHV. With 6 amps of maximum charging current and 2 amps of discharging current, the RDX1 Mini is the next best way to stay charged with Hitec!

Note:We recommend reading this Motion RC knowledge blog articleabout charger amperage and wattage ratings.

Features:

• User-Friendly LCD Interface
• Stores 10 Different Battery Memory Charge/Discharge Profiles
• Terminal Voltage Control
• Built-in Balance Connector (JST, XT)
• Cell Balancing While Discharging
• Balance, Standard, Fast and Storage Modes for All Lithium Battery Chemistries
• Re-Peak Charge Mode and Delta-Peak Sensitivity for NiMH/NiCd Batteries
• Optional Temperature Sensor for NiCd/NiMH Charging
• Built-in XT60 Connector
• Smart Ventilation Fan

Includes:

• Hitec RDX1 Mini 65W4 Cell (4S) LiPo AC Charger
• AC Power Cord
• 2 PIN T-TYPE Charge Connector

** LiPo BATTERY CHARGER SAFETY WARNING **

Never, under ANY circumstances, leave your charger unattended while charging a LiPo battery. Keep the charger away from moisture, dust, direct sunlight, or any heat sources. The charger should always be placed on a heat-resistant, non-flammable surface during charging. Never overcharge or exceed a 1C charge current. A 1C charge current means the charge current equals the capacity of the battery. For example, a 2200mAh battery should never be charged using a current greater than 2.2 Amps (2200mAh).