Nexa G36 Sport 1580mm (62.2″) Wingspan – ARF

Introduction

Nexa G36 Sport 1580mm (62.2″) Wingspan – ARF from Nexa – NXA1014-001

Introduced in the late 1940s and still flying today, the G36 Sport holds the distinction of being the aircraft with the longest continuous production run.

The Nexa G36 Sport is a .50-size electric scale series civilian aircraft with a 1610mm wingspan, constructed primarily from balsa wood and fully covered. This ARF requires assembly and installation of your choice of servos and power system, and includes a two piece wing design with aluminum wing joiner, fiberglass cowling, painted pilot, struts, flaps, a large battery hatch and pre-hinged and installed control surfaces.

Please Note: Struts pictured are optional shock absorbing struts. More basic wire struts are included with the plane. The optional struts are located in our “upgrade” or “spare parts” tabs (coming soon).

Visit the Official Nexa G36 Sport 1580mm ARF Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.

Features:

• Fully covered in an attractive white, red and black scheme with panel line and rivet detail
• Complete Balsa and lite-ply construction for rigidity and durability
• Wheels and struts are included
• Two piece wing with aluminum wing joiners for easy transport
• Functional flaps for shorter takeoffs and slower landings
• Fiberglass cowling, detailed cockpit and painted pilot for added scale appeal
• All control surfaces come out of the box pre-hinged and installed for convenience
• Large battery hatch allows easy access to your chosen electric setup

Includes:

• Nexa G36 Sport 1580mm (62.2″) Wingspan – ARF
• Spinner, fiberglass cowling
• Motor mounts
• Wheels, wheel covers and struts
• Hardware and decals

Requires:

• 6 Channel radio – select a minimum 6 channel radio from our Radio Collection
• 6 Channel receiver – select a minimum 6 channel receiver from our Receiver Collection
• 770Kv or equivalent brushless outrunner motor – we recommend the Admiral GP5 4220-770Kv Brushless Motor
• 85 Amp brushless ESC – we recommend the ZTW Skyhawk 85A ESC with 8A SBEC
• 4x high torque micro servos for ailerons and flaps – we recommend Hitec HS-85BB High Torque Micro Servo Airplane Multi-Pack (4 Servos)
• 3x standard metal gear servos for elevator and rudder – we recommend Hitec HS-485HB Deluxe Ball Bearing Karbonite Gear Standard Servo Airplane Multi-Pack (3 Servos)
• Electric retracts for the landing gear – we recommend Nexa Electronic Retract Set with Struts – Type E
• 4 Cell 14.8V 4500 – 5000 mAh LiPo Battery – we recommend the Admiral 5000mAh 4S 14.8V 40C LiPo Battery with XT60 Connector
• 12×8 Electric propeller – we recommend the Admiral 12×8 Electric Series Wood Propeller
• 4 Cell compatible battery charger – select a minimum 4 cell (4S) charger from our Charger Collection

Customer Note

Nexa ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).