Black Horse F4U-1D Corsair 2280mm (89.7″) Wingspan – ARF

Introduction

F4U-1D Corsair 2280mm (89.7″) Wingspan from Black Horse – Balsa Wood ARF – BHM1000-001

The Corsair was designed and operated as a carrier-based aircraft, and entered service in large numbers with the U.S. Navy in late 1944 and early 1945. It quickly became one of the most capable carrier-based fighter-bombers of World War II. Some Japanese pilots regarded it as the most formidable American fighter of World War II and its naval aviators achieved an 11:1 kill ratio.

The model is scaled to approximately 1:5 and attention was paid to a true to original appearance and best flight characteristics. The model can be operated using an electric power system or with an internal combustion engine about 60cc displacement.

Visit the Official Black Horse F4U-1D Corsair 2280mm Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.

Features:

• Model officially licensed by Northrop Grumman
• Included Rotary 90 degree electric main retracts with CNC suspension metal struts
• Included electric retractable tail landing gear
• High level of prefabrication right out of the box
• Lightweight, strong, laser cut balsa and plywood construction
• Panel lines and details printed directly onto the pre-applied, high quality covering
• Aerofoiled tail surfaces
• Recessed hinges on all control surfaces
• Pre-drilled hinge mounting holes
• Heavy-duty pin hinges on all control surfaces
  
• Large easy access fuel tank/battery/servo access hatches with sprung loaded latches
• Painted and detailed cockpit, pilot and interior included
• Fiberglass control horns with ball link connector
• comprehensive control and fitting accessories included
• Two-piece, plug-in wings simplify transportation and assembly
• Fiberglass cowl and glass reinforced landing gear covers/pants
• Mounts for both electric and gas power options included

Includes:

• Black Horse F4U Corsair 2280mm (89.7″) Wingspan – ARF
• Rotary 90 degree main electric retracts with CNC suspension metal struts
• Electric retractable tail wheel

Requires (Electric):

• 8 Channel radio – select a minimum 8 channel radio from our Radio Collection
• 8 Channel receiver – select a minimum 8 channel receiver from our Receiver Collection
• 180Kv Brushless outrunner motor – we recommend the Admiral GP60 8925-180Kv Brushless Motor
• 160 Amp brushless ESC – we recommend the ZTW Skyhawk 160A ESC High Voltage with 10A SBEC
• 2x 2S 2000-3000mAh LiPo or LiFe receiver packs – we recommend Admiral 2100mAh 2S 6.6V LiFe Battery with XT60/JR/Futaba Connectors
• 8x high torque servos – we recommend 8 Hitec HS-645MG Ultra Torque Ball Bearing Metal Gear Standard Servos
• 2x 6 Cell 22.2V 5000 – 6000 mAh LiPo batteries in series – we recommend the Admiral Pro 6000mAh 6S 22.2V 50C LiPo Battery with EC5 Connector Multi-Pack (2 Batteries)
• EC5 2-to-1 series adapter – BenchCraft EC5 2 to 1 Series Adapter with 10 Gauge Silicone Wire
• Electric propeller – we recommend the APC 22×12 Thin Electric Propeller
• 6 Cell compatible battery charger – select a minimum 6 cell (6S) charger from our Charger Collection

Requires (Gas):

• Engine: 55-65cc gas
• Gas Propeller: 22×8

Customer Note

Black Horse ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).