Nexa PA-22 Tri-Pacer 1620mm (63″) Wingspan – ARF

Introduction

PA-22 Tri-Pacer 1620mm (63″) Wingspan – ARF from Nexa – NXA1027-001

The PA-22 Tri-Pacer is a light strut-braced high-wing monoplane aircraft built by Piper Aircraft from 1949 to 1964.

The Nexa PA-22 Tri-Pacer is a electric or gas option .60-size civil airplane with a 1620mm wingspan, constructed primarily from balsa wood and covered with a fuel-resistant covering. This ARF requires assembly and installation of your choice of servos and power system, fully functional flaps, fiberglass cowl, wingtip tanks and other scale details. The large battery hatch affords ample room for either electric or gas setups. Impress at your flying field with this fun civil flyer!

Visit the Official Nexa PA-22 Tri-Pacer 1620mm ARF Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.

Features:

• Complete Balsa and lite-ply construction for rigidity and durability
• Covered from tip to tail in scale details including functional flaps, plastic seat, antenna, printed simulated panel lines and rivets
• Fiberglass cowling for strength and durability
• All control surfaces come out of the box pre-hinged and installed for convenience
• Large battery hatch allows for your chosen electric or gas setup

Includes:

• Nexa PA-22 Tri-Pacer 1620mm (63″) Wingspan – ARF
• Wheels and spinner
• Fuel tank, hardware and decals

Requires:

• 6 Channel radio – select a minimum 6 channel radio from our Radio Collection
• 6 Channel receiver – select a minimum 6 channel receiver from our Receiver Collection
• 670Kv or equivalent brushless outrunner motor – we recommend the Admiral GP7.5 5020-670Kv Brushless Motor
• 65 Amp brushless ESC – we recommend the ZTW Skyhawk 65A ESC with 8A SBEC
• 4x mini servos for ailerons and flaps – we recommendHitec HS-82MG Metal Gear Micro Servo Airplane Multi-Pack (4 Servos)
• 2x standard servos for rudder and elevator – we recommendHitec D-645MW High Voltage High Torque Digital Metal Gear Servo Multi-Pack (2 Servos)
• 4 Cell 14.8V 4500 – 5000mAh LiPo Battery – we recommend the Admiral 5000mAh 4S 14.8V 40C LiPo Battery with XT60 Connector
• 2-blade electric propeller – we recommend the Admiral 13×10 Electric Series Wood Propeller
• 4 Cell compatible battery charger – select a minimum 4 cell (4S) charger from our Charger Collection

Gas Requires:

• .46 – .70 (7.45cc – 11.5cc) gas engine – we recommend the NGH GT9 Pro 9cc Two-Stroke Engine
• 2-blade gas propeller – we recommend APC 12×6 Gas Propeller

Customer Note

Nexa ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).